Blar i SINTEF Open på forfatter "Andreassen, Kari Anne"
-
3D Printed PEI Containing Adsorbents Supported by Carbon Nanostructures for Post-combustion Carbon Capture From Biomass Fired Power Plants
Krishnamurthy, Shreenath; Blom, Richard; Andreassen, Kari Anne; Middelkoop, Vesna; Rombouts, Marleen; Borras, Adolfo Benedito (Peer reviewed; Journal article, 2021)Processes that utilize solid adsorbents to capture CO2 are promising alternatives to state-of-art Amine based technologies for capturing CO2 from large point sources. Although the energy needs of solid sorbent-based processes ... -
CO2 Capture with Structured Sorbents Containing Multiwalled Carbon Nano Tubes and Polyethyleneimine (PEI)
Krishnamurthy, Shreenath; Blom, Richard; Andreassen, Kari Anne; Grande, Carlos; Middelkoop, Vesna; Rombouts, Marleen; Borras, Adolfo Benedito (SINTEF Proceedings;7, Chapter; Peer reviewed; Conference object, 2021)In this work monolithic adsorbents containing polyethyleneimine (PEI) and multiwalled carbon nanotubes obtained by 3D printing. CO2 and N2 isotherms were measured using a commercial volumetric apparatus. Breakthrough ... -
Effect of Manufacturing Techniques in Pressure Drop on Triple Periodical Minimal Surface Packings
Zimmer, Arthur; Pacheco Araújo, José D.; Andreassen, Kari Anne; Grande, Carlos Adolfo (Peer reviewed; Journal article, 2021)Structured packings are important elements to enhance mass and heat transfer in the chemical industry. New techniques of manufacturing, like 3D printing, can create completely new families of solids used for this purpose. ... -
Evaluation of simplified pressure swing adsorption cycles for bio-methane production
Canevesi, Rafael L S; Andreassen, Kari Anne; Silva, Edson A.; Borba, Carlos E.; Grande, Carlos Adolfo (Journal article; Peer reviewed, 2019)Pressure swing adsorption (PSA) is a mature technique for biogas upgrading. However, it constitutes the most expensive step to obtain fuel-quality bio-methane, particularly in small-scale units. To reduce the cost of ... -
Experimental Results of Pressure Swing Adsorption (PSA) for Pre-combustion CO2 Capture with Metal Organic Frameworks
Grande, Carlos Adolfo; Blom, Richard; Andreassen, Kari Anne; Stensrød, Ruth Elisabeth (Peer reviewed; Journal article, 2017)Vacuum Pressure Swing Adsorption (VPSA) has already proved that it can be used for capture of CO2 from the tail gas of the PSA process for hydrogen purification. The demo operated in Port Arthur by Air Products has already ... -
In-situ XRD studies of dolomite based CO2 sorbents
Arstad, Bjørnar; Lind, Anna Maria; Andreassen, Kari Anne; Pierchala, Joanna; Thorshaug, Knut; Blom, Richard (Peer reviewed; Journal article, 2014)Calcined dolomite (a CaOMgO material derivative of the natural mineral dolomite) has the potential as a CO2 sorbent working at high temperatures (500-650 °C) in processes like post combustion carbonate-looping, or in sorbent ... -
Multiscale investigation of adsorption properties of novel 3D printed UTSA-16 structures
Grande, Carlos Adolfo; Blom, Richard; Middelkoop, Vesna; Matras, Dorota; Vamvakeros, Antonis; Jacques, Simon D.M.; Beale, Andrew M.; Michiel, Marco Di; Andreassen, Kari Anne; Bouzga, Aud Mjærum (Peer reviewed; Journal article, 2020)Structuring MOF materials is a fundamental step towards their commercialization. Herein we report intensive characterization of 3D-printed UTSA-16 monoliths, facilitated by the development of a new non-aqueous ink formulation, ... -
Studies of Ca-based high temperature sorbents for CO2 capture
Arstad, Bjørnar; Spjelkavik, Aud I.; Andreassen, Kari Anne; Lind, Anna Maria; Prostak, Joanna; Blom, Richard (Peer reviewed; Journal article, 2013)The natural mineral dolomite has been calcined and impregnated with Ti-, Zr-, Al-nanoparticle suspensions with the aim of improving the cyclic stabilities in high temperature CO2 sorption processes. After impregnation and ...